CI 3PC BALL VALVE F/E ASA 150#

Specification Valve Type 3 Piece Ball Valve Body Construction Three Piece Bolted Body Body Material Cast Iron (CI) End Connection Flanged End Flange Standard ASME/ANSI B16.5 Class 150 (verify drilling) Flange Facing Raised Face (RF), if applicable Ball Type Floating Ball Bore Type Full Bore / Reduced Bore – confirm Operation Manual Lever Operated Flow Control 90° Quarter Turn Size Range As per manufacturing range Design Standard BS 5351 / ISO 17292, subject to design validation Testing Standard API 598 / applicable approved test procedure

2. Material of Construction (MOC)

Sr. No.	Part Name	Material (Proposed)
1	Centre Body	CI – Cast Iron
2	End Connector (2 Nos.)	CI – Cast Iron
3	Ball	SS304 / SS316
4	Ball Seat (2 Nos.)	PTFE
5	Stem	SS304 / SS316
6	Stem Packing	PTFE
7	Body Gasket / Seal	PTFE
8	Lever Handle	MS / CS with coating
9	Fasteners	CS / SS, as per design

Primary Service Rating & Test Pressure

CLASS	HYD. TEST PRESSURE
	BODY	SEAT	TEMP.
150	425 PSIG	320 PSIG	100°F